How to Check Affiliate Links for Broken Redirects, One Post at a Time.

Affiliate links on a travel blog stop working without any warning.

Affiliate links on a travel blog stop working without any warning. The post still loads and nothing looks wrong when you read it, but a reader who clicks may land on an error page, a generic homepage, or a product that no longer exists. This article walks through an audit you can run in an afternoon: list every affiliate link, click each one the way a reader would, sort the result into one of four outcomes, and apply a fixed rule to each. It is a maintenance routine, so there is no strategy in it, only a spreadsheet and some patience.

Why a quiet broken link costs you readers and commissions

A broken affiliate link fails silently. Your site does not flag it, the affiliate network does not email you about it, and you will not see it unless you click it yourself. Meanwhile every visitor who reaches that sentence hits the problem.

Travel content is more exposed than most niches. Hotels rename, tour operators change their booking pages, seasonal offers expire, and affiliate programs close or move to a different network. A post written a year ago can easily contain links to pages that have moved.

The cost shows up in two places:

  • Commissions. You are paid when a click turns into a booking or purchase. A reader who lands on a 404 page, or on a homepage with no sign of the tour you described, almost never completes it.
  • Reader trust. People use travel posts to plan trips and spend real money. If the link you recommended leads nowhere, they have reason to doubt the rest of the post.

A third cost is less obvious. A link can land on the right page and still pay you nothing if the redirect drops your affiliate ID along the way. The audit below checks for that as well.

Build your link inventory before you click anything

Clicking links at random wastes time and misses things. Build a complete list first, then work through it in order.

Start a spreadsheet with these columns:

A flat-lay of a printed travel blog post covered in highlighter marks and sticky tabs beside a notebook ruled into columns, a cup of coffee and a paper map of Portugal on a pale wooden desk in soft morning window light.
  • Post URL
  • Anchor text (the words the reader clicks)
  • Link URL
  • Program or network
  • Date checked
  • Final landing page
  • Result (working, wrong page, dead, program closed)
  • Action taken
  • Date fixed

There are three practical ways to fill it.

1. Crawl the site. A crawler visits every page and lists every outbound link. Export the list and filter it to the domains your affiliate links use: the network’s tracking domain, or your own domain if you use a link cloaking plugin. Free crawlers exist for this, and I cover them further down.

2. Read your cloaking plugin’s list. If you shorten links with a plugin (for example, links that start with yoursite.com/go/), the plugin keeps a list of every link you created. Export it. Be aware that a link can exist in the plugin and no longer be used on any post, and a post can contain a raw affiliate link that never went through the plugin, so this list alone is not complete.

3. Go post by post. For a small site, open each post and note every affiliate link by hand. It is slow, but it is the only method that shows you the link in context, next to the sentence that promises something to the reader.

Once the list exists, sort it by traffic so your most-visited posts come first. If your analytics are connected, that takes a minute. The audit goes through ONE post at a time, and the high-traffic posts go first because a broken link there loses the most.

Click every link like a reader would, and what to write down

Open a private or incognito window. This keeps your logged-in sessions and saved cookies from changing what you see. Then click each link from the live post, not from the spreadsheet. Clicking from the post confirms that the link on the page is the one in your log.

A smartphone propped on a desk next to an open laptop, the phone showing a blurred hotel booking page in a private browsing window, with a handwritten notepad of final web addresses beside them in warm lamplight.

For each link, write down:

  1. The final address in the browser bar after all redirects finish.
  2. What the page shows. Is it the product, hotel, tour or offer your sentence described?
  3. Whether it matches the promise. If your post says “a three-day guided hike,” does the page sell a three-day guided hike?
  4. Whether your affiliate ID survived. Many programs leave a tracking parameter in the final address. Some do not, and for those you need the network dashboard’s click report to confirm the click was recorded.

Check on a phone as well as on a computer for your top posts. Some redirects behave differently on mobile, and many readers open travel posts on their phones.

If you have readers in several countries, remember that some merchants redirect by location. A link that works from your country may send readers elsewhere to a different version of the site, or to an error. A free VPN is not a reliable test, so treat this as something to note and verify through the network’s support if you suspect it.

Your own clicks may appear in your affiliate reports. Keep that in mind when you read click numbers after an audit.

Spot the four outcomes: working, wrong landing page, dead, program closed

Every link ends up in exactly one of these.

Working

The link redirects to the right page, the page matches what your post says, and the tracking ID is present or confirmed in the dashboard. Log the date and move on.

Wrong landing page

The link loads, but the page is not the one you meant. Typical forms:

A split scene on one table: a printed travel itinerary describing a sunrise hiking tour on the left, and on the right a tablet showing a generic, unrelated beach resort homepage, suggesting a mismatch between promise and destination. Cool daylight, teal and orange tones.
  • It lands on the merchant’s homepage instead of the specific product or destination.
  • It lands on a different product, or a category page.
  • It lands on the right page but the tracking ID is gone from the address.
  • It shows a different currency, country version or language than your readers expect.

This is the outcome people miss, because nothing looks broken. The page loads, so a quick glance says “fine.”

Dead

The link returns an error: a 404 (page not found), a 410 (gone), a server error, or a message that the link is invalid or the account is disabled. A dead link may be dead because the merchant removed the page, because the redirect domain expired, or because your affiliate account was suspended. The log should record what the error said, since the fix depends on the cause.

Program closed

The merchant or network has ended the affiliate program. You may see a message saying the program is closed, a redirect to the merchant homepage with no tracking, or a notice in your network dashboard that you were removed. The link may still load a page, which is why you should also check the program’s status in the dashboard for any merchant you cannot confirm is still active.

Fix, replace or remove: my rule for each result

Each outcome has one default action. Having the rule written down means you decide once instead of at every link.

Working: leave it. Record the date checked. Do not edit a working link.

Wrong landing page: replace it. Go to the program dashboard and generate a fresh link to the correct page. Paste it in, click it again from the post, and confirm the landing page and tracking. If the product no longer exists, treat it like a dead link.

Dead: find out why, then replace or remove. Open the merchant’s own website and search for the product. If the page exists at a new address, create a new affiliate link to it from the dashboard. If the product is gone, look for the nearest equivalent that the same program sells. If there is no honest equivalent, remove the link.

Program closed: remove the link and fix the sentence. If you still want to recommend the product, you can link to it directly without tracking so the reader still has a working path, but you will earn nothing from it. If you would rather recommend an alternative, find a program that is open and relevant. My rule is that a link is never left in place “just in case.” A link that cannot pay and cannot help the reader has no reason to be there.

Removing a link means editing the sentence around it. Do not leave text like “book it here” with nothing to click. Read the paragraph back after each edit and make sure it still makes sense on its own.

When you replace a link that is NOT in the same program as the old one, check the new program’s terms before you publish. Programs differ on what they allow, and a replacement that breaks the rules can cost you the account.

Write what you did in the “Action taken” column and the date in “Date fixed.” That column is what tells you next quarter whether a problem is new or came back.

Use a free checker to speed up the boring part, and where it falls short

A checker can test hundreds of links in minutes. That is useful for the first pass, since most links will be working and you only want to spend time on the ones that are not.

Free options fall into three kinds:

  • Desktop crawlers. Screaming Frog’s SEO Spider has a free version that crawls a limited number of URLs per run, which covers many small sites. It runs on your computer and lists the status code of every link.
  • Online checkers. You enter a page address and the tool reports broken links on it. These suit checking a single post.
  • WordPress plugins. They scan inside your site and flag broken links in the dashboard. They run on your hosting, so they use your server’s resources. A crawler on your own computer puts no load on the site.

Whichever you use, know what it cannot do:

  • Blocked bots. Many affiliate networks and merchants refuse automated requests, so a working link can come back as an error such as 403 or 429. Treat these as “check by hand,” not as proof the link is dead.
  • Soft failures. Some dead links redirect to a homepage that returns a normal “OK” status. The checker reports success. You will only catch this by looking at the page.
  • No judgment about content. A checker cannot tell whether the landing page matches what your sentence promised.
  • No tracking check. It cannot confirm your affiliate ID reached the merchant.
  • Location-based redirects. It tests from one place, usually yours.

My approach is to use the checker to sort the list into “clearly fine” and “needs a look,” then click through everything flagged and every link in the top posts by hand.

Set a schedule so the audit does not pile up again

The first audit is the longest because the whole list is new. After that, the routine is short if you keep it regular.

A wall calendar with recurring monthly and quarterly dates ringed in red pen, a small suitcase-shaped desk ornament and a closed laptop on a tidy home-office desk in calm afternoon light. Include a Bombay cat lying down with head up at end of the desk.

A schedule that fits a solo blogger:

  • Every month: check your three to five most-visited posts.
  • Every quarter: run the full inventory and checker pass, then click through anything flagged.
  • When a network emails you about program changes, closures or new terms: check every link for that program straight away.
  • When you publish a new post: add its affiliate links to the log the same day, with the date checked.

Put the dates in your calendar as recurring reminders. An audit that depends on remembering will not happen.

Keep the spreadsheet. Over time the “Result” column shows which programs and merchants keep failing, and that tells you which programs to rely on less. Which brings you to your first task.

Pick your three most-visited posts today and run the audit on just those. Then read how I judge travel affiliate networks so you know which programs are worth keeping links for.

Leave a Reply

Your email address will not be published. Required fields are marked *